ALL NEW 6061 FPV QuadCopter X4ARF 6061 Quadcopter ARF Kit X4
New FPVpilot's 6061 Aluminum Frame Quadcopter
X4Prototype 6061 Quad shown.Now has longer bottom anti-vibration platform
Because the 6061 Quad frame X4 handles abuse much better you'll spend
more time flying and less time repairing or gathering spare parts.
The 6061 Quad frame X4 has square 6061 T6 Boom arms which are
designed with Aerial Photography (AP) and FPV piloting in mind. Because
the Quad booms are very strong and ridged much less vibration is being transmitted to the main frame
giving better results which is ideal for use with HD cameras.
Has lower bottom hanging anti-vibration camera platform which is also an added benefit for the electronics, AP/FPV cameras and
that is typically mount on the frame. The booms can
easily be folded back making it easier for
transportation. We will also be adding other options like Landing gear,
Extended battery tray, GoPro HD/Point and Shoot cam tilt mount, etc....
Weight is less then 9oz /290 grams. Dimensions: motor to motor with stock boom arms
The 6061 frame plate has a large Dimple Died hole just like those
used on full size aircraft and race cars. This type of hole gives even
better strength and rigidness along with making the plate lighter
Because the 6061 Quad frame is made from strong light weight aircraft aluminum_____________________________________________________________________________________________________________
it can take the stress of RC flying better then most other materials
not to mention it looks great on the ground or flying overhead.
Electronics and Power Systems for 6061 Quadcopter X4ARF Kit Includes: ARF 6061 Multicopters NOW come with the New Powerful 650KV 230 watts 25
amps Brushless Multicopter Outrunners with 4mm shaft and Prop adapters. 3.5mm gold plated connectors.3s to 4s Lipo rated. __________________________________________________________________________________ The popularKK2-multicopter
Board. The KK/HK2 multicopter boards are easy and basic to set up un-like
all the other multicopter boards on the market. Any 4 +channel RC radio can be used but a 6 channel is recommended. Connects directly to
the RC Receiver with included male to male servo connectors. Can be
re-programed with the included USB cable to update or operate other
multicopters with 3 to 6 motors. Easy set up and is very user friendly.
ESC 30Amp Con. -40amp burst (10sec.) Speed
Controller with SimonK Multicopter Firmware (No need to program ready to fly)
Input voltage: DC 6-16.8V (2s-4S
Running current:30A(Output: Continuous
30A, Burst 40A up to 10 Secs.)
4) Powerful 650 KV Brushless Outrunner Motors 3s-4s lipo rated with 3.5mm gold plated connectors
4) 30 amp ESC. 7- 16.5 volts 2s-4s lipo rated
1) Upper 6061 T6 Aluminum Main Frame
1) Lower 6061 T6 aluminum Main Frame
4) Aluminum Boom arms with mounting hardware
1) 168 Quadcopter Control Board (uses latest KK software)
1) Now With USB update cable for latest versions and updating control board if needed
4) Male to Male servo connectors for connecting Quad controller to your RC RX.
1) Main power board with deans ultra type connector
4) 12" Propellers 2 counter rotating (CCW) and 2 regular (CW) and 2 spares one of each
All you need is some basic tools for assembly.
KK2 flight control board Comes pre-programmed as Quad "X" and is ready to fly.
Reqiures your own
3s or 4s 3000-4000mah lipo battery
6 Channel RC radio TX and RX
Camera and FPV gear
Part# 6061X4-650kv-ARF Sale Price$476.98
Now In Stock
______________________________________________________________________________________________________________Frame Only6160 Quad Frame & Booms. Comes as a kit with all needed hardware to build a 6061 Quad frame X4
Part# 6061X4-FB Sale Price$119.98
Now In Stock
So why not use Fiberglass, G-10, Wood
or Carbon Fiber? although these materials are good, some what strong and light
they lack the
ability to with stand a crash as well as aluminum when used as a
frame....and if aluminum is bent, it can
just be flatten back out in most cases so your good to fly again without having to
wait or make parts. If adding holes are
needed to mount cameras, etc...aluminum is still going to be strong
where the other
materials become weaker and even can splinter and/or separate the
laminated layers making them weak unless you use a special drill bit.
Even then it can be a problem.
Customer Video from MauiNate using the 6061 Quadcopter, GoPro HD Hero 2